Ultrasonic Systems for Precise Cleaning Applications
2045 Martin Avenue, Suite 204 Santa Clara, CA 95050
 

Medical 3D Printing Benefits from Ultrasonic Cleaning

February 16, 2018

Hospitals, medical research centers and facilities are increasingly using industrial ultrasonic cleaners on 3D printed models of organs or body parts to create prosthetics. Organ models for a particular patient can help determine the best way to proceed with surgery and may help with accurate diagnosis. Both models and prosthetics are used in educational programs […]

Read More

Why Use Ultrasonic Cleaning Systems with a Heater?

January 30, 2018

Ultrasonic cleaning systems can remove a wide variety of contaminants from the surfaces of parts to be cleaned, but specific material types can be removed more quickly and completely with additional measures. Oil-based dirt, grease and organic compounds can take the form of hard deposits that are difficult for the cavitation bubbles of the ultrasonic […]

Read More

How Ultrasonic Cleaning Systems Promote Profitability

January 19, 2018

Conventional degreasing and other cleaning processes involving the use of pressure cleaning, solvent and abrasives are on their way out in many industries. The change has come about for a number of reasons. The movement of industry towards green processes is one reason — solvents are often toxic to the environment. New environmental regulations being […]

Read More

How Utility Companies Cut Grease, Grime and Costs with Ultrasonic Cleaners

December 22, 2017

The large compressors that utility companies use to move natural gas through pipelines and into storage need extensive maintenance. Both the compressors themselves and the engines that drive them require regular cleaning of parts such as valves, rings, sensors and actuators. Unwanted deposits have to be dissolved, grease and grime have to be cleaned off […]

Read More

The Power behind Ultrasonic Cleaning Systems

December 13, 2017

Coatings of grime, grease and sludge are only some of the stubborn contaminants that industries everywhere struggle with. The conventional approach to the cleaning and maintenance of equipment has always been environmentally hazardous, involved harsh chemicals, difficult protective equipment for workers, and costly compliance procedures. Few alternatives have proven viable. Ultrasonic cleaning technology today, however, […]

Read More

Using Ultrasonic Cleaning for Fuel Injectors

November 20, 2017

408 Fuel injectors may suffer from deposits to such an extent that they have to be removed from the engine and cleaned manually. Traditional methods involve soaking in harsh solvents, forcing solvents through the injector at high pressure and removing deposits manually. These methods often don’t result in complete removal of the deposits and they may […]

Read More

3 Big Cost Savings Benefits of Using Ultrasonic Cleaners Vs. Spray Washers

November 8, 2017

From delicate medical equipment to machine parts, there is very little in the world of industrial cleaning where ultrasonic cleaners do not excel, often leaving conventional cleaning methods behind. Making use of sonic waves at frequencies as high as 400 kHz to create and implode millions of bubbles on surfaces that need work, ultrasonic cleaning forms microscopic […]

Read More

Cleaning Brass and Stainless Steel Media Using Ultrasonic Parts Cleaners

October 30, 2017

Ultrasonic parts cleaners use ultrasonic frequency generators and transducers to create tiny bubbles in water or a mild detergent solution. The bubbles produce a microscopic scrubbing action that is highly effective in removing surface contaminants from solid metal surfaces such as brass and stainless steel. Traditional cleaning methods using harsh chemicals and mechanical scrubbing are […]

Read More

Using De-Ionized Water with an Ultrasonic Cleaning System

October 16, 2017

De-ionized (DI) water is plain water that has been purified to remove contaminants such as metals and salts (ions). When DI water is used in ultrasonic cleaning systems it can improve cleaning performance, depending on the parts to be cleaned and the nature of the contaminants to be removed. Such increased cleaning performance is especially […]

Read More

Using Ultrasonic Cleaning Systems in Aerospace Manufacturing Applications

September 29, 2017

The aerospace industry manufactures high-precision parts as well as repairing and maintaining complex engines and machinery. Production parts and parts from maintenance and repair operations are often contaminated by dirt, grease, oil or other lubricants deriving from normal operation or from production processes. Traditionally these parts have been cleaned manually by scrubbing or washing with […]

Read More
CTABanner